INFO

Press-in technique from DSM

for optimum connections.

QMP series SMP series Accessories

In the field of electromechanical press-in units, DSM covers a joining force range of 50 N to 120,000 N. In line with requirements, we equip the joint units with a greater stroke, return stop or electromechanical brake. Thanks to in-house production, customer-specific designs are possible. The distance can be measured relatively or absolutely. The distance measuring procedure to be used is set in the control system. In digital joining technology, DSM offers two series: the QMP series and SMP series.

The QMP series

Press-in units from the QMP series are designed for compressive and tensile forces and are fitted in a slimline square stainless steel housing. The digital load cell protected against overload is located directly in the plunger. The distance is measured via an absolute displacement system. LED status indicators on the press-in unit display the operating status and processing result.

  • QMP 80 series
  • QMP 100 series
  • QMP 140 series


  • Press-in unit with brushless, electronically controlled servo motor, digital force sensor, displacement sensor and LED status indicator.

    Available in the basic design with 200 mm, 300 mm
    or 500 mm stroke.

    Available nominal forces: 2.5 kN, 5 kN, 10 kN, 20 kN and 25 kN in compressive, tensile pressure or compressive and tensile design.

    Product datasheet QMP 80
    (PDF, 753KB)

    Press-in units overview
    (PDF, 652KB)



    • Servo motor, motor attachment vertical
    • Force sensor direct-acting, installed in the plunger
    • Precision of force measurement 0.5% of the final value
    • Displacement sensor (absolute encoder) directly fitted on the ball screws
    • Distance repeat precision 0.01 mm at approx. 20 mm/s
    • Distance measurement resolution 0.003 mm
    • Light field for displaying joint status
    • Stamping speed max. 200 mm/s in both directions continuously variable

    Standard options:
    • Optimisation of design through drive offset
    • Maintain force with electromechanical brake, return stop and force regulator
    • Portal frame, C-frame produced according to customer-specific specifications
  • Press-in unit with brushless, electronically controlled servo motor, digital force sensor, displacement sensor and LED status indicator.

    Available in the basic design with 200 mm, 300 mm or 500 mm stroke.

    Available nominal forces: 30 kN, 40 kN, 50 kN and 60 kN in compressive, tensile pressure or compressive and tensile design.

    Product datasheet QMP 100
    (PDF, 686KB)

    Press-in units overview
    (PDF, 652KB)

    • Servo motor, motor attachment vertical
    • Force sensor direct-acting, installed in the plunger
    • Precision of force measurement 0.5% of the final value
    • Displacement sensor (absolute encoder) directly fitted on the ball screws
    • Distance repeat precision 0.01 mm at approx. 20 mm/s
    • Distance measurement resolution 0.003 mm
    • Light field for displaying process status
    • Stamping speed max. 200 mm/s in both directions continuously variable

    Standard options:

    • Optimisation of design through drive offset
    • Maintain force with electromechanical brake, return stop and force regulator
    • Portal frame, C-frame produced according to customer-specific specifications
  • Press-in unit with brushless, electronically controlled servo motor, digital force sensor, displacement sensor and LED status indicator.

    Available in the basic design with 200 mm, 300 mm
    or 500 mm stroke.

    Available nominal forces: 70 kN, 100 kN and 120 kN
    in compressive, tensile pressure or compressive and tensile design.

    Product datasheet QMP 140
    (PDF, 532KB)

    Press-in units overview
    (PDF, 652KB)

    • Servo motor, motor attachment angled via drive offset
    • Force sensor direct-acting, installed in the plunger
    • Precision of force measurement 0.5% of the final value
    • Displacement sensor (absolute encoder) directly fitted on the ball screws
    • Distance repeat precision 0.01 mm at approx. 20 mm/s
    • Distance measurement resolution 0.003 mm
    • Light field for displaying process status
    • Stamping speed max. 100 mm/s in both directions continuously variable

    Standard options:

    • Maintain force with electromechanical brake, return stop and force regulator
    • Portal frame, C-frame produced according to customer-specific specifications

The SMP series

Press-in units from the SMP series are exclusively designed for compressive forces and very robust, not to mention low maintenance. The slimline design proves impressive in harsh industrial environments. The load cell is positioned in the direct vicinity of the plunger. The distance is measured using the absolute distance measuring system.

  • SMP 300 series
  • SMP 400 series
  • SMP 500 series
  • Press-in unit with brushless, electronically controlled servo motor, digital force sensor and displacement sensor.

    Available in the basic design with 100 mm, 200 mm
    or 400 mm stroke.

    Available nominal forces: 0.5 kN, 1 kN and 2 kN
    in compressive design.

    Product datasheet SMP 300
    (PDF, 433KB)

    Press-in units overview
    (PDF, 641KB)

    • Servo motor, motor attachment angled via drive offset for compact design
    • Force sensor direct-acting, installed on the plunger
    • Precision of force measurement 1% of the final value
    • Displacement sensor (absolute encoder) directly fitted on the ball screws
    • Distance repeat precision 0.01 mm at approx. 20 mm/s
    • Distance measurement resolution 0.003 mm
    • Stamping speed max. 350 mm/s in both directions continuously variable

    Standard options:

    • Portal frame, C-frame produced according to customer-specific specifications
  • Press-inunit with brushless, electronically controlled servo motor, digital force sensor and displacement sensor.

    Available in the basic design with 100 mm, 200 mm
    or 400 mm stroke.

    Available nominal forces: 5 kN and 10 kN
    in compressive design.

    Product datasheet SMP 400
    (PDF, 436KB)

    Press-in units overview
    (PDF, 641KB)

    • Servo motor, motor attachment angled via drive offset for compact design
    • Force sensor direct-acting, installed on the joint plunger
    • Precision of force measurement 1% of the final value
    • Displacement sensor (absolute encoder) directly fitted on the ball screws
    • Distance repeat precision 0.01 mm at approx. 20 mm/s
    • Distance measurement resolution 0.003 mm
    • Stamping speed max. 200 mm/s in both directions continuously variable

    Standard options:

    • Portal frame, C-frame produced according to customer-specific specifications


  • Press-in unit with brushless, electronically controlled servo motor, digital force sensor and displacement sensor.

    Available in the basic design with 100 mm, 200 mm
    or 400 mm stroke.

    Available nominal forces: 20 kN, 30 kN, 50 kN and 70 kN
    in compressive design.

    Product datasheet SMP 500
    (PDF, 419KB)

    Press-in overview
    (PDF, 641KB)



    • Servo motor, motor attachment angled via drive offset for compact design
    • Force sensor direct-acting, installed on the plunger
    • Precision of force measurement 1% of the final value
    • Displacement sensor (absolute encoder) directly fitted on the ball screws
    • Distance repeat precision 0.01 mm at approx. 20 mm/s
    • Distance measurement resolution 0.003 mm
    • Stamping speed max. 150 mm/s in both directions continuously variable

    Standard options:

    • Portal frame, C-frame produced according to customer-specific specifications