Press-in technique

The SMP Series

The press-in units of the SMP series are speci­fi­cally designed for compres­sive forces and stand out thanks to their robust, low-mainten­ance construc­tion. Their straight­for­ward design makes them ideal for use in harsh indus­trial environments.

The digital force sensor is positioned close to the plunger; stroke measu­re­ment is performed via an absolute measu­re­ment system.

In combi­na­tion with the MultiPro 3G control system, high-precision force trans­du­cers and exact position detec­tion enable reliable assembly – with complete documen­ta­tion of all process data.

The SMP series provides a powerful system for quality-critical press-in applications.

Technical Features at a Glance:

  • Mainten­ance-free servo motor for long-lasting and reliable operation

  • High repea­ta­bi­lity for consis­tent process quality

  • Compact design with offset drive

  • Robust housing made of stain­less steel and aluminum

  • Resistant to electro­ma­gnetic inter­fe­rence thanks to digital data transmission

SMP 300
SMP 400
SMP 500

SMP 300 Series

SMP 300

Press-in unit with brushless, electro­ni­cally controlled servo motor, digital force sensor and absolute stroke measu­re­ment system.

The SMP-300 series is available in a basic design with a stroke of 100 mm, 200 mm or 400 mm. Available nominal forces: 0.25 kN, 0.5 kN, 1 kN, and 2 kN in DR version (compres­sion).

Features

  • Servo motor, motor attach­ment angled via motor offset for compact design
  • Force sensor direct-acting, installed on the plunger
  • Precision of force measu­re­ment 1% of the final value
  • Displa­ce­ment sensor (absolute encoder) directly fitted on the ball screws
  • Distance repeat precision 0.01 mm at approx. 20 mm/s
  • Distance measu­re­ment resolu­tion 0.003 mm
  • Stamping speed max. 350 mm/s in both direc­tions conti­nuously variable

Force Ranges

  • SMP 300 / 0025*: 0.05 to 0.25 kN

  • SMP 300 / 005*: 0.1 to 0.5 kN

  • SMP 300 / 01: 0.2 to 1 kN

  • SMP 300 / 02: 0.4 to 2 kN

* with extern­ally mounted digital force sensor

Access­ories

  • Sealing air connec­tion – avoids the ingress of dirt particles into the press-in unit
  • Portal frame manufac­tured accor­ding to customer-specific requirements
  • C‑frame manufac­tured accor­ding to customer-specific requirements
  • Service package – lubri­ca­tion set

Weights

  • With 100 mm stroke: approx. 6.5 kg

  • With 200 mm stroke: approx. 7.5 kg

  • With 400 mm stroke: approx. 9.0 kg

Data sheet SMP 300 (PDF, 565KB)
SMP 300
SMP 300
previous arrow
next arrow

SMP 400 Series

SMP 400

Press-in unit with brushless, electro­ni­cally controlled servo motor, digital force sensor and absolute stroke measu­re­ment system.

The SMP-400 series is available in a basic design with a stroke of 100 mm, 200 mm or 400 mm. Available nominal forces: 5 kN and 10 kN in DR version (compres­sion).

Features

  • Servo motor, motor attach­ment angled via drive offset for compact design
  • Force sensor direct-acting, installed on the joint plunger
  • Precision of force measu­re­ment 1% of the final value
  • Displa­ce­ment sensor (absolute encoder) directly fitted on the ball screws
  • Distance repeat precision 0.01 mm at approx. 20 mm/s
  • Distance measu­re­ment resolu­tion 0.003 mm
  • Stamping speed max. 250 mm/s in both direc­tions conti­nuously variable

Force Ranges

  • SMP 400 /05: 1 to 5 kN

  • SMP 400 / 10: 2 to 10 kN

Standard options

  • Motor holding brake for higher tool weight

Access­ories

  • Fan unit for cooling the motor
  • Sealing air connec­tion – avoids the ingress of dirt particles into the press-in unit
  • Portal frame manufac­tured accor­ding to customer-specific requirements
  • C‑frame manufac­tured accor­ding to customer-specific requirements
  • Service package – lubri­ca­tion set

Weights

  • With 100 mm stroke: approx. 22 kg

  • With 200 mm stroke: approx. 24 kg

  • With 400 mm stroke: approx. 30 kg

Data sheet SMP 400 (PDF, 569KB)
Handschrauber DSH 26

SMP 500 Series

SMP 500

Press-in unit with brushless, electro­ni­cally controlled servo motor, digital force sensor and absolute stroke measu­re­ment system.

The SMP-500 series is available in a basic design with a stroke of 100 mm, 200 mm or 400 mm stroke. Available nominal forces: 20 kN, 30 kN, 50 kN, and 70 kN in DR version (compres­sion).

Features

  • Servo motor, motor attach­ment angled via drive offset for compact design
  • Force sensor direct-acting, installed on the plunger
  • Precision of force measu­re­ment 1% of the final value
  • Displa­ce­ment sensor (absolute encoder) directly fitted on the ball screws
  • Distance repeat precision 0.01 mm at approx. 20 mm/s
  • Distance measu­re­ment resolu­tion 0.003 mm
  • Stamping speed max. 150 mm/s in both direc­tions conti­nuously variable

Force Ranges

  • SMP 500 / 20: 4 to 20 kN

  • SMP 500 / 30: 6 to 30 kN

  • SMP 500 / 50: 10 to 50 kN
  • SMP 500 / 70: 14 to 70 kN

Standard options

  • Motor holding brake for higher tool weight

Access­ories

  • Fan unit for cooling the motor
  • Sealing air connec­tion – avoids the ingress of dirt particles into the press-in unit
  • Portal frame manufac­tured accor­ding to customer-specific requirements
  • C‑frame manufac­tured accor­ding to customer-specific requirements
  • Service package – lubri­ca­tion set

Weights

  • With 100 mm stroke: approx. 100 kg

  • With 200 mm stroke: approx. 120 kg

  • With 400 mm stroke: approx. 150 kg

Data sheet SMP 500 (PDF, 642KB)
Handschrauber DSH 26